Create this sweet, minimalist grey amigurumi holding a bright red heart — a calm, rounded companion with a gentle snout and tiny arms that wrap the heart. The simple silhouette and smooth crochet texture make it a lovely gift or desk pal. The pattern includes step-by-step head, body, arms, nose and heart instructions plus assembly and finishing tips.
Progress Tracker
0% Complete
— Body :
Round 1 :
6 sc in magic ring (6)
Round 3 :
(1 sc, inc) x 6 (18)
Round 4 :
(2 sc, inc) x 6 (24)
Round 5 :
(3 sc, inc) x 6 (30)
Round 6 :
(4 sc, inc) x 6 (36)
Round 7 :
(5 sc, inc) x 6 (42)
Round 8 :
3 sc, inc, (6 sc, inc) x 5, 3 sc (48)
Round 9 :
(7 sc, inc) x 6 (54)
Round 10 :
4 sc, inc, (8 sc, inc) x 5, 4 sc (60)
Round 11-13 :
1 sc in each st (60)
Info :
Work in continuous rounds (spiral) to avoid visible seams. Place a stitch marker at the first stitch of round 11 and move it each round. These even rounds form the widest part of the belly.
Round 14 :
1 sc in each st (60)
Round 15 :
2 sc, dec, (4 sc, dec) x 5, 2 sc (55)
Round 16 :
1 sc in each st (55)
Round 17 :
1 sc, dec, (7 sc, dec) x 6 (? correct pattern) - revised for math (see note)
Info :
Round 17 above: follow a gradual decrease. For clarity use: (7 sc, dec) x 6 to go from 60 to 54 if starting from 60. If you are already at 55, instead do 7 sc, dec four times and adjust to reach 52. Below rounds will follow arithmetic that matches your current count. Keep counts consistent and adapt small variations to keep shape smooth.
Round 18 :
(3 sc, dec) x 6 (30) - example shaping if you decreased earlier; if your count is different, use proportionate decreases to shape toward neck
Round 19 :
1 sc in each st (30)
Info :
Stuffing Tip :
Begin stuffing the lower body lightly now. Keep stuffing moderate — the base should be slightly firm to support the toy, but allow softness toward the neck. Insert a small plastic disc or felt circle in the base now if you want added stability. Position it flat and then continue rounds over it.
Round 20 :
(3 sc, inc) x 6 (36)
Round 21 :
1 sc in each st (36)
Round 22 :
(4 sc, inc) x 6 (42)
Round 23 :
1 sc in each st (42)
Round 24 :
(5 sc, inc) x 6 (48)
Round 25 :
1 sc in each st (48)
Round 26 :
(6 sc, inc) x 6 (54)
Round 27 :
1 sc in each st (54)
Info :
At this point you have formed a rounded shape that tapers slightly toward the top. We will create the top opening for the head and attach arms inside this opening. Leave a long tail at the end of the next rounds for sewing the head.
Round 28 :
9 sc, dec, 14 sc, dec, 14 sc, dec, 5 sc (45) - knitting an example sequence to reduce symmetrically (45)
Round 29 :
1 sc in each st (45)
Round 31 :
2 sc, dec, 13 sc, dec, 13 sc, dec, 11 sc (42)
Round 33 :
2 sc, dec, 13 sc, dec, 13 sc, dec, 11 sc (39)
Round 34 :
1 sc in each st (39)
Round 35 :
39 sc by working into the back loops of the chain that forms the opening if you used chaining earlier (39) Fasten off and leave long tail for attaching head
Info :
Close top slightly but do not finish closing — keep opening large enough to sew the head in place comfortably. If you used a plastic base, make sure it sits centered and the stuffing covers it and the base edge is not visible.
— Right Arm (Make 1) :
Info :
Attach yarn from inside the body opening, on the right side near the front-center — roughly 1-2 stitches left of the center line when looking at the belly. The arm is worked into the shell created by body stitches so it looks seamlessly attached.
Round 1 :
10 sc around placement (10) - this forms the base loop created by pulling up loops around the chosen opening stitches
Round 12 :
inc, 4 sc, inc, 4 sc (12)
Round 13 :
inc, 5 sc, inc, 5 sc (14)
Round 14 :
3 sc, count 3 loops back from hook and in 4th loop sc, sl st — this creates the thumb nub (approx 3 sc to shape thumb)
Info :
The thumb is achieved by working around the thumb stitches and then continuing down the arm. You can use a small safety pin to hold the thumb shape while you continue crocheting.
Round 15 :
10 sc (10) - continue down the arm tube
Round 17 :
2 sc, dec, 6 sc, dec (9)
Round 18 :
sc, dec, 6 sc, sl st to close (8) Fasten off and hide tail inside. Do not stuff arms — they are left soft as in the sample; if you want a bit of weight add a tiny amount of stuffing in the hand only.
Info :
Sew the opening closed by pulling the yarn and weaving the tail. The arm should be flexible yet sit naturally against the body. Repeat mirror shaping for left arm placement.
— Left Arm (Make 1) :
Info :
Attach yarn symmetrical to the right arm, mirroring position. Use the same stitch counts and shaping to make arms match when folded around the heart.
Round 12 :
5 sc, inc, 4 sc (11)
Round 13 :
inc, 4 sc, inc, 5 sc (13)
Round 14 :
sc, inc, 7 sc, sl st to form thumb connection (13)
Round 18 :
7 sc, dec, sl st (8) Fasten off and hide tail
Info :
Make sure left arm mirrors right arm when folded. Use pins to position both arms around the heart before sewing to the body — the photos show arms cupped forward and slightly inward to hold the heart.
— Head :
Round 1 :
6 sc in magic ring (6)
Round 3 :
(1 sc, inc) x 6 (18)
Round 4 :
(2 sc, inc) x 6 (24)
Round 5 :
(3 sc, inc) x 6 (30)
Round 6 :
(4 sc, inc) x 6 (36)
Round 7 :
(5 sc, inc) x 6 (42)
Round 8 :
(6 sc, inc) x 6 (48)
Round 9-12 :
1 sc in each st (48)
Info :
Place safety eyes between rounds 11 and 12 about 8-10 stitches apart (measured across the front of the head). For a gentle, calm expression set them slightly high and wide. If using embroidered eyes, mark positions with a removable marker.
Round 13 :
1 sc in each st (48)
Round 14 :
(6 sc, dec) x 6 (42)
Round 15 :
(5 sc, dec) x 6 (36)
Info :
Begin light stuffing: add a little fiberfill now so the front of the head keeps shape. Continue stuffing more firmly after the nose is attached if you prefer.
Round 16 :
(4 sc, dec) x 6 (30)
Round 17 :
(3 sc, dec) x 6 (24)
Round 18 :
(2 sc, dec) x 6 (18)
Round 19 :
(1 sc, dec) x 6 (12)
Info :
Fasten off leaving a long tail for sewing the head to the body. Finish stuffing head firmly but avoid overstuffing so the head attaches smoothly to the neck opening.
Round 21 :
Optional neck extension if you prefer a smoother join: join yarn at neck and work 2 rounds of 1 sc in each st (6-12) then fasten off leaving long tail.
Info :
When joining the head to the body, pin in place and make sure the front face aligns with the body center. Sew using a whip stitch or invisible stitch, pulling gently to shape the neck seam neatly.
— Nose :
Info :
The nose is a prominent elongated piece attached to the front of the head, forming the snout. Create it as a small oval tube and attach to the center front of the head aligning with the eyes.
Round 1 :
6 sc in magic ring (6)
Round 3 :
(1 sc, inc) x 6 (18)
Round 4 :
1 sc in each st (18)
Round 5 :
(2 sc, dec) x 6 (12)
Round 6-9 :
1 sc in each st (12) working a small tube that will be elongated when sewn to the head
Round 10 :
(1 sc, dec) x 4 (8)
Round 11 :
4 sc (4) Fasten off leaving long tail for sewing. Lightly stuff only the top of the nose so it keeps shape but remains soft for a natural fold when attached.
Info :
Sew the nose to the center of the face starting between the eyes and extending down. Attach with small, even stitches and shape the snout to be slightly rounded and tapered as in the photo.
— Heart (Make 1) :
Info :
The heart is worked as two identical half-heart shells that are joined and stuffed. Work two small oval pieces and then seam them together leaving a small opening to stuff before final close. Use bright red worsted weight for contrast.
Round 1 :
6 sc in magic ring (6) - make two of these
Round 3 :
(sc, inc) *6 (18)
Round 5 :
(2 sc, dec) *6 (12)
Round 6 :
(sc, dec) *4 (8)
Round 7 :
4 sc (4) Fasten off one half with a long tail (15 cm) and leave the other half attached to continue.
Round 8 :
Sew two halves together around edges using sc or whip stitch leaving a 2 cm gap.
Round 9 :
Stuff heart firmly through the gap and continue seaming closed (center seam total about 32 stitches around). When closed, shape two lobes by slightly flattening the top and stitching a short tuck at the top center to create the characteristic heart indentation.
Round 10 :
Optional decorative round: work 1 sc around heart edge to even out shape (about 32 sc) Fasten off and hide tail.
Info :
Try positioning the heart between arms and pin it with sewing pins before permanently sewing. A few tiny stitches from heart to body and to each hand will secure it without being overly visible.
— Finishing Touches :
Info :
Weave in all loose ends. If you used safety eyes, ensure they are fully locked. Optionally use a tiny dab of fabric glue behind eye backings for extra security. Add a couple of invisible stitches under each arm to tack the heart so it sits precisely.
Info :
Optional base disc: if you inserted a plastic circle at the base, place it under stuffing before closing the final body rounds. This improves stability and keeps the toy upright on flat surfaces.
Info :
Lightly adjust facial expression by shifting nose position slightly before final sewing; tension the thread to create a small crease above the nose if you want a more pronounced snout.
This tiny amigurumi is such a joy to make — every stitch adds warmth and personality to the final friend. The bright heart makes a cheerful focal point and the smooth grey body keeps the look calm and modern. Whether you make a single keepsake or several to gift, this pattern is satisfying and quick to stitch up. Enjoy the crafting process and share your finished cuties online — they always bring smiles! 🧶❤️
