Make a handy crocheted first aid kit pouch to carry your essential supplies while traveling. This no-frills zippered pouch features a rectangular base and a cute granny-square plus emblem on the front. You can easily customize the size, yarn, and colors to suit your needs and style. Clear step-by-step instructions guide you through construction, zipper attachment, and finishing.
Progress Tracker
0% Complete
β Finished Measurements :
Info :
Sample shown is 9" wide (along top edge folded flat) x 2" from front to back (near bottom of bag) x 5.75" tall, however size is easily customizable. Changing the size of the pouch will change the yardage needed. (Note- the Rectangular Bottom measures 8" x 2")
β Materials :
Infos :
Approximately 160 yds [146m] acrylic, cotton, or wool worsted weight yarn for pouch. Approximately 60 yds [55m] acrylic, cotton, or wool sport or light worsted weight yarn for granny square emblem. US G [4.0mm] crochet hook or size needed to obtain gauge for pouch. US D [3.25mm] crochet hook or size needed to obtain gauge for granny square "+" symbol only. Yarn needle. Removable stitch markers. Non-separating zipper (sample shown measures 9", however if altering the size of the pouch, the zipper size will change too). Sewing needle and thread (for attaching zipper).
β Yarn Used for Kit Shown :
Info :
Red Heart Super Saver (worsted weight, CYCA #4, 100% acrylic; 364 yards [333 m]) Spring Green #0672 (MC), Partial skein. Patons Grace (light weight, CYCA #3, 100% mercerized cotton; 136 yards [125 m]) Natural #62008 (CC), Partial skein.
β Gauge :
Info :
16 sts and 20 rows = 4" over Single Crochet, blocked. 1 granny square = about 1.5", blocked. See notes below about changing size of pouch.
β Notes :
Infos :
Pouch begins by working in turned rows to form a rectangle. After rectangular bottom is made, stitches are worked around the rectangle's perimeter, and pouch is worked in the round from the bottom up. 5 small granny squares are each constructed separately, then stitched together to form the "+" sign emblem. The granny squares are all stitched onto the front of the bag. A small strip of crocheted fabric is made, then looped through the zipper pull and stitched in place. Turning chains in the rectangular bottom do not count as a stitch. Use a locking stitch marker to note the beginning of the round.
β Changing size of pouch :
Info :
Changing the size of the pouch will change the amount of yarn needed, as well as the zipper length needed. If making a smaller pouch than the sample shown, you may need to use a thinner yarn for the granny stitch portion - try a fingering weight yarn, or thin crochet thread (size 3 or size 10) to make smaller granny squares. Otherwise, your "+" symbol may not fit on the front of the bag.
β Instructions :
Rectangular bottom :
With MC and larger hook, ch 31.
Info :
Note for altering size: Chain more sts for a wider pouch, fewer for a smaller pouch. Add 4 sts for each inch of added width. Subtract 4 sts for each inch of subtracted width.
Row 1 :
Beginning with the 2nd ch from hook and working into the bottom of the chain, 1 SC into each st. 30 SC.
Rows 2-10 :
Ch 1 (turning ch does not count as a st), turn, 1 SC in each st across. Do not turn after working the last row. Do not fasten off.
Info :
Note for altering size: Work more rows here for a larger front-to-back measurement. Work fewer rows here for a smaller front-to-back measurement. To add or subtract one inch, add or subtract 5 rows.
β Sides :
Set-Up Rnd :
Ch 1 (does not count as a stitch), rotate work 90 degrees, to stitch along row-ends. Use a stitch marker to divide the side edge (along row-ends) into two equal sections. 5 SC into each of the two sections along row-ends to next corner, place stitch marker in first st to keep track of first st of round, rotate work 90 degrees to stitch along opposite edge of foundation chain, placing one SC into each of the 30 sts across edge, rotate work 90 degrees to stitch along row ends (use stitch marker to divide edge in half as before), 5 SC into each of the two sections along row-ends, rotate work 90 degrees and work 1 SC into each st across ending at marked stitch, do not join, but continue to work in the round. 80 SC around.
Info :
Note if altering size: If more stitches were added to Rectangular Bottom, be sure to work into each stitch along long edges. If more rows were added, work extra stitches along row-ends (there should be one stitch in each row along row-ends). This will alter the stitch count.
Rounds 1-28 :
SC into each stitch around.
Info :
On last round fasten off at side edge of bag with a sl st (fold bag flat along top opening to find side edge). Work more stitches after last round if needed, to end at side edge.
Info :
Note for altering size: Work more or fewer rounds here to change the height of the pouch.
β Zipper tab :
Info :
With larger hook and MC, ch 13.
Row 1 :
Beginning with the 2nd ch from hook and working into the bottom of the chain, 1 sl st in next st, SC in each of next 10 sts, 1 sl st in last st. 2 sl st, 10 SC.
Row 2 :
Ch 1 (turning ch does not count as a st), turn, 1 sl st in next st, 1 SC in each of next 10 sts, 1 sl st in last st.
Info :
Fasten off leaving long tail for sewing.
β Emblem :
Granny square (make 5) :
Set-up Rnd: With CC and smaller hook, ch 4, sl st in first ch to join into a ring.
Rnd 1 :
Ch 3 (counts as the first DC of rnd), 2 DC in center of ring, [ch 2, 3 DC in ring] 3 times, HDC into top of the ch-3 at beginning of rnd, this HDC counts as the last ch-2 sp of rnd as well as a join.
Rnd 2 :
Ch 3 (counts as first DC of rnd), 2 DC in same sp, *skip next 3 DC, [3 DC, ch 2, 3 DC] in next ch-2 sp, repeat from * twice more, skip next 3 DC, 3 DC into first ch-2 sp, HDC into top of ch-3 to join (HDC counts as a ch-2 sp as well as the join).
Rnd 3 :
Ch 3 (counts as first DC of rnd), 2 DC in same ch-2 sp, *skip next 3 DC, 3 DC into sp before next set of 3 DC sts, skip next 3 DC, [3 DC, ch 2, 3 DC] in next ch-2 sp, repeat from * twice more, skip next 3 DC, 3 DC into sp before next set of 3 DC sts, skip next 3 DC, [3 DC, ch 2] into first ch-2 sp, sl st into top of ch-3 to join.
Info :
Fasten off leaving long tail for sewing.
β Finishing :
β Zipper :
Info :
Check measurement of zipper against the measurement of opening. If zipper is longer than opening, it can be shortened from the bottom by stitching around the zipper teeth several times with a needle and thread and trimming away the excess below the stitching line. Pin zipper into opening in top of pouch. Place zipper tape to inside of crocheted fabric and make sure teeth are far enough away from crocheted fabric so that it will not get snagged by zipper teeth. Using sewing needle and thread, stitch zipper in place from the RS, just below the "v"s along the top edge of opening with a back stitch.
Info :
Feed one end of zipper tab through the opening in zipper pull. Using yarn needle and yarn tails, stitch short ends of zipper tab together. Position the narrow section of zipper tab within the hole in zipper pull, then stitch tab in place just above opening in zipper pull to keep it in place. Weave in all ends of MC.
β Emblem: Making the "+" sign :
Info :
Weave in all beginning yarn tails of granny squares, but leave ending tails loose for sewing. Position all granny squares in formation on table and whip stitch edges together to make the + symbol. Pin the + symbol to the front of the bag. Use yarn needle and yarn tails to sew symbol in place, using a back stitch around all edges.
This First Aid Kit Zippered Pouch pattern is a practical and pretty travel essential you can make in an afternoon.π§Ά
Customize the colors and size to suit your needs and gift it with confidence.β¨
A small, useful project that adds a handmade touch to your travel kit.β€οΈ