This festive Snowy Village Table Runner brings a handcrafted winter wonderland to your table. Featuring diamond snowflake motifs, textured green scalloped edges, red berry bobbles and charming 3D embellishments — mini fir trees, a snowman and tiny fences — it creates a layered, cozy scene. Worked in worsted weight cotton for crisp stitch definition, the runner is built motif-by-motif and joined to form a long, dramatic centerpiece perfect for holiday decorating.
Progress Tracker
0% Complete
— Notes & Gauge :
Info :
This runner is constructed from repeating diamond 'snowflake' motifs joined tip-to-tip to create a long tableau. Gauge is not critical for overall length but is important for motif fit: 1 completed diamond motif measures approximately 22cm (8.7in) corner-to-corner when worked in worsted cotton with a 3.5mm hook. Maintain consistent tension throughout. Use stitch markers at round starts and when placing embellishments.
— Diamond Snowflake Motif (Make 6–8 motifs to lengthen runner) :
Round 1 :
mr, ch2 (counts as first dc), 7 dc in ring, sl st to top of ch2 to close (8 dc into ring) (8)
Round 2 :
ch3 (counts as dc), dc in same st, *(2 dc in next st)* x7, sl st to top of ch3 (16)
Round 3 :
ch3, dc in same st, *(1 dc, 1 inc (2 dc in same st)) in next 1 st* x8; sl st to top of ch3 (24)
Round 4 :
ch3, dc in same st, *(2 dc, inc) x8; sl st to top of ch3 (32)
Round 5 :
ch3, dc in same st, *(3 dc, inc) x8; sl st to top of ch3 (40)
Info :
Work these early rounds loosely; they will be the center of the snowflake. Maintain the increasing pattern (every round adds 8 stitches total). Use the sl st join as shown for neat round transitions.
Round 6 :
ch3, dc in same st, *(4 dc, inc) x8; sl st to top of ch3 (48)
Round 7 :
ch3, dc in same st, *(5 dc, inc) x8; sl st to top of ch3 (56)
Round 8 :
ch3, dc in same st, *(6 dc, inc) x8; sl st to top of ch3 (64)
Round 9 :
ch3, dc in same st, *(7 dc, inc) x8; sl st to top of ch3 (72)
Info :
At this stage you have a round disc. To shape into a diamond/snowflake with points, the next rounds introduce chain spaces and picot/cluster points so corners form distinct tips. Keep counts accurate: all increase patterns repeat exactly 8 times per round.
Round 10 :
ch1, sc in same st, *ch5, skip next 9 sts, sc in next st; repeat from * around to create 8 ch-5 loops; join with sl st to first sc (8 loops)
Round 11 :
Work in loops: in each ch-5 loop work (sc, hdc, 3 dc, hdc, sc) to form petal arches. Join with sl st to first sc. (No fixed stitch count; 8 petals)
Round 12 :
ch3, dc in same st, *(2 dc in next st, ch2, sk 2, dc cluster in next petal top) x8; sl st to join. This begins the shaping into diamond corners by bridging petals with chains.
Info :
When making the petal arches, pull stitches gently to maintain a rounded look — do not over-tighten. The diamond shape is formed by alternating stretched petal joins and tighter central arcs.
Round 13 :
ch1, sc evenly along petal arches and across small chain bridges to form a stable surface for later layers. Aim for 96 sc around (approximate; stitch to maintain even edge)
Round 14 :
ch3, dc in each sc around forming a slightly raised lattice (96 dc) — this creates the 'snowy ground' texture
Info :
If you want a slightly smaller motif, stop here and finish with border rounds below. For the runner in the photo we continue to sculpt four pronounced points and shallow scallops between them.
Round 15 :
ch1, sc in same st, *[sc in next 11 sts, (sc, ch4, sc) in corner point to create diamond tip] repeat x4 around; sl st to first sc. Total stitch count varies — ensure 4 corner points are evenly spaced.
Round 16 :
In each ch-4 corner loop: (sc, hdc, 5 dc, hdc, sc) to build a pronounced point. Between corners work (sc, ch2, sc) in the previous sc spaces to create shallow scallops. Join with sl st.
Info :
At rounds 15-16 you are forming the diamond silhouette: four sharp points alternate with scalloped edges. Use pins to shape points during blocking before adding the green scalloped border.
Round 17 :
ch1, sc evenly around the entire diamond to tidy up edges — aim for ~120 sc (actual stitch count depends on prior joins)
Round 18 :
Change to 'snow texture' using clusters: *(ch1, skip 1, bobble in next st, ch1, sc in next) repeat across round to give fluffy bobble texture over the surface; join with sl st
Round 19 :
ch2, hdc in each st around working into bobble/chains to even the surface (120 hdc) — this evens the look for attaching embellishments
Info :
Make slight surface bobbles instead of full popcorns so small decorative pieces can be sewn on without bulk. Reserve a row of plain sc near where you plan to sew trees and houses to anchor them securely.
Round 20 :
ch1, sc around in BLO to create slight ridge for joining border later (120 sc)
Info :
Fasten off leaving long tail for joining motifs. Block motif flat, pinning tips to accentuate diamond points. Make required number of motifs (photo shows seven diamonds joined end-to-end to make a long runner). Mark which edges will be joined tip-to-tip before assembly.
— Joining Motifs Into Runner :
Info :
Lay out diamond motifs in desired order. Each motif will be joined at two opposite tips to its neighbors to form a zig-zag runner. Join with whip stitch or slip-stitch join through the BLO ridge row to hide seams. Leave wide central bays unobstructed for placement of 3D embellishments.
Round J1 :
With right sides facing, align tip stitches and either sl st through both motif loops for a visible crochet join, or use mattress stitch with yarn needle for invisible join. Aim for 8 joining sts per tip (or match the number of sc in tip). Repeat joins for all motif tips along length.
Info :
Pin motifs together and count stitches along join edges before committing to sewing. You may find it easier to use a provisional join with removable stitch markers to check alignment before final sewing.
— Green Scalloped Border & Berry Edge :
Info :
Once motifs are joined in a continuous runner, the entire perimeter receives a deep green scalloped border with red bobble berries placed at regular intervals in each scallop valley.
Round B1 :
Attach green yarn at an outer corner point. ch1, sc evenly around entire runner edge working 3 sc in each peak to maintain shape. Approximate total sts around runner ~480 sc depending on number of motifs.
Round B2 :
ch3, *skip 1, 5 dc in next st, skip 1, sl st in next sc* repeat around to form scallops. Join with sl st. Count: each scallop cluster is 5 dc; number of scallops equals number of outer peaks and valleys (~60 scallops for 7 motifs).
Round B3 :
ch1, sc into top of each scallop, in each valley work (sc, ch3, sc) to create small loop for berry placement. Fasten off green, change to red for berries.
Round B4 (Berry) :
In each ch-3 valley: attach red, make 5 sc in ring to form small puff, then working into back loops attach small bobble by making a 5-dc bobble (bobble stitch: 5 dc together, close) anchor with sl st to center. Fasten off leaving tail to weave and secure. Repeat at each valley. This creates the red berry clusters spaced evenly.
Info :
Arrange red berries symmetrically around the runner to mirror the photo: typically one berry cluster at each scallop valley along both sides and slightly smaller berries at inner corners. Secure with extra sewing for durability.
— 3D Fir Trees (Make multiple sizes) :
Info :
Trees are worked as layered cones with alternating rounds in BLO to create ridged branches. Use forest green yarn and 3.0mm hook for a tight fabric. Make small (approx 5cm), medium (8cm) and large (10-12cm) trees for variety.
Tree Small - Round 1 :
mr, 6 sc in ring (6)
Round 3 :
(1 sc, inc) x6 (18)
Round 4 :
(2 sc, inc) x6 (24)
Info :
These initial increases form the tree base. Work each increase round in the BLO from here to create ridge lines for branches on later rounds.
Round 5 :
1 sc in each st BLO around (24)
Round 6 :
(3 sc, inc) x6 (30) work this round in BLO (30)
Round 7 :
1 sc in each st BLO (30)
Round 8 :
(4 sc, inc) x6 (36) in BLO (36)
Round 9 :
1 sc BLO around (36)
Round 10 :
(5 sc, inc) x6 (42) in BLO (42)
Info :
At rounds 5-10 you have a small cone. Continue for the desired tree height by alternating a round of increases with a round of BLO sc to create layered ridges. For a small tree stop here and begin shaping; for medium and large continue rounds 11–18 below.
Round 11 :
1 sc BLO around (42)
Round 12 :
(6 sc, inc) x6 (48) in BLO (48)
Round 13 :
1 sc BLO around (48)
Round 14 :
(7 sc, inc) x6 (54) in BLO (54)
Round 15 :
1 sc BLO around (54)
Round 16 :
(8 sc, inc) x6 (60) in BLO (60)
Round 17 :
1 sc BLO around (60)
Round 18 :
Begin decreasing to form a tapered top: (8 sc, dec) x6 (54)
Round 19 :
(6 sc, dec) x6 (42)
Round 20 :
(4 sc, dec) x6 (30) - stuff lightly with fiberfill through opening and fasten off leaving tail for sewing base closed
Info :
For a more natural look, after stuffing and closing, trim some of the BLO loop edges with tiny snips to soften branch ridges. Add small white surface-stitched 'snow' areas using leftover white yarn by sewing short stitches over branch tips.
— Snowman (Make 1–2 small snowmen) :
Info :
Snowman constructed as two stacked spheres (body and head). Use white yarn, 2.75mm hook for tight fabric. Add small black embroidered eyes, carrot nose, and red scarf (tiny crocheted chain tube).
Snowman Body - Round 1 :
mr, 6 sc in ring (6)
Round 3 :
(1 sc, inc) x6 (18)
Round 4 :
(2 sc, inc) x6 (24)
Round 5 :
1 sc around (24)
Round 6 :
(3 sc, inc) x6 (30)
Round 7 :
1 sc around (30)
Round 8 :
(3 sc, dec) x6 (24) begin stuffing body firmly with small amounts of fiberfill
Round 9 :
(2 sc, dec) x6 (18)
Round 10 :
(1 sc, dec) x6 (12) fasten off leaving tail to sew to head
Snowman Head - Round 1 :
mr, 6 sc in ring (6)
Round 3 :
(1 sc, inc) x6 (18)
Round 4 :
(2 sc, inc) x6 (24)
Round 5 :
1 sc around (24)
Round 6 :
(2 sc, dec) x6 (18) stuff head firmly, then join to body opening using whip stitch or invisible stitch. Add embroidered eyes (2mm black stitches) and an orange French-knot nose or a tiny crocheted cone nose.
Info :
For scarf: with red yarn and 2.75mm hook ch20, sc back across to form a tiny tubular scarf, wrap around neck and sew ends. Hat: create a small black flat circle then work 2 rounds of sc up the sides to form a tiny top hat; stuff minimally and sew to head.
— Tiny Gift Boxes & Bows (Make several) :
Round G1 :
With red yarn mr, 6 sc in ring (6)
Round G3 :
(1 sc, inc) x6 (18)
Round G4 :
1 sc around (18) fasten off leaving tail to flatten into a small round gift. For bow: chain 6, sl st to form loop, secure to top of gift and embroider a gold knot.
Info :
Tuck gifts into the snow between trees and houses. Use contrasting thread to sew in place and add small metallic beads for present embellishments if desired.
— Rustic Fence (Make 2-3 panels) :
Round F1 :
With tan/brown yarn ch14, sc in 2nd ch from hook and across (13)
Round F2 :
ch1, turn, sc across (13)
Round F3 :
fasten off leaving long tails and fold ends to form fence posts; stitch verticals using yarn needle to create 3 posts spaced evenly across the strip. Make 2 strips and join with small crossbars (short ch6 strips) sewn across to form a rustic fence panel.
Info :
Stiffen fence slightly by applying a little craft glue diluted with water if you want it to stand; for a fully flat runner, leave fence panels soft and sew flat onto motifs.
— Little Houses (Optional Crochet Cottages or Use Miniatures) :
Info :
The photo shows tiny model houses — you can either use similar small wooden houses or crochet tiny cottages. Below is a simple cottage worked flat and assembled; adjust size to fit your motif bay.
House Front - Round H1 :
With deep red yarn ch12, sc in 2nd ch from hook and across (11)
Round H2 :
ch1, turn, sc across (11) repeat for 6 rows to form the front wall
House Roof :
Switch to white, ch1, sc across row, next row (sc, ch2, skip 1) to form scalloped snowy roof edges; make two roof pieces and sew to top of wall. Embroider windows in yellow/gold and door in brown. Sew assembled house to motif using strong thread.
Info :
For a more realistic illuminated look, add a tiny warm LED behind the window if using wooden houses. When sewing on crochet cottages, anchor well with multiple stitches along base to prevent flopping.
— Placement & Assembly of Embellishments :
Info :
Arrange embellishments on your joined runner before sewing. Common placement from photo: clusters of trees at both ends and centered in each diamond long bay, small houses grouped in central diamonds, snowman placed on a forward motif near the table center, fences and gifts scattered near tree bases. Pin each element and photograph layout to reference while sewing.
Assembly Step 1 :
Using long leftover tails and yarn needle, sew each tree to the runner through the motif sc row, bringing needle up through motif and down through base of tree several times for secure anchoring. Hide tails by weaving into the runner edge.
Assembly Step 2 :
Sew houses in place with small whip stitches along house base into motif body row. Reinforce by stitching through motif foundation rows to prevent sagging under the house weight.
Assembly Step 3 :
Attach the snowman by sewing through the body base into motif surface; add extra stitches through bottom rows for stability. Use a small button or bead for the base if desired to prevent rolling.
Info :
For heavy embellishments (wood houses, LEDs), use small upholstery thread or sewing thread and sew through multiple motif points. Consider small fabric squares under the house to distribute sewing tension across several stitches.
— Final Finishing :
Info :
Weave in all yarn tails on the wrong side. Steam-block runner gently on blocking mats to flatten and set shape — pin diamond tips and scallops while blocking. Add any final tiny embroidered details like footprints, snow accents, or golden lamp posts sewn in place.
Round F-Off :
With contrasting gold or cream, work a tiny running stitch along select valley seams as decorative trim. Trim stray fibers and press lightly.
Info :
Your assembled runner is now ready for display. If using LEDs, insert batteries discreetly under one motif and hide wiring along seam lines. Store flat to preserve shape when not in use.
Completing this Snowy Village Table Runner is a joyful journey from simple motifs to a whimsical holiday scene! Each stitched diamond and tiny tree adds depth and personality, and the red berries and green scallop border finish everything beautifully. Display it proudly on your table or gift it to someone who loves handmade holiday decor — it’s sure to become a seasonal favorite. 🧶❄️✨
