Create a charming sunflower table runner made of four linked sunflower medallions, leafy accents and lacy cream connectors. This pattern features raised textured petals, a deep brown spiral center, delicate cream floral clusters and sculpted olive-green leaves. Finished runner lays flat on a farmhouse table and adds sunny, handmade charm to any room.
Progress Tracker
0% Complete
β Sunflower Center :
Round 1 :
With Chocolate Brown and a 3.0mm hook, make a mr. Work 6 sc into mr (6)
Round 2 :
Inc in each st around (12)
Round 3 :
(1 sc, inc) x 6 (18)
Round 4 :
(2 sc, inc) x 6 (24)
Round 5 :
(3 sc, inc) x 6 (30)
Info :
Switch to 3.5mm hook after Round 5 if you want the center to relax slightly for easier petal attachment. Keep tension firm so no holes show in brown center.
Round 6 :
1 sc in each st around (30)
Round 7 :
1 sc in each st around (30)
Round 8 :
1 sc in each st around (30)
Info :
At this point the center forms a sturdy disk. If you want a slightly domed center, work a round of hdc in next round instead of sc and stuff minimally with fiberfill placed under the next petal base.
Round 9 :
(3 sc, inc) x 6 (36)
Round 10 :
1 sc in each st around (36)
Round 11 :
1 sc in each st around (36)
Round 12 :
Sl st into next st and fasten off leaving long tail for sewing petals (36)
Info :
Make 4 centers total for a standard runner with four sunflowers. You can make fewer or more depending on runner length.
β Petal (Make 16 petals per sunflower) :
Round 1 :
Join Golden Yellow to the center disk at any base stitch with a sl st. Ch1, work 4 sc across a stitch base to create a short foundation for petal base, sl st into next center stitch to anchor (this forms a small anchoring loop). Repeat to make 16 anchors around center evenly spaced. (Anchors = 16)
Info :
Alternate method: mark 16 evenly spaced stitches on Round 10-11 of the center and join petals at those marks so petals are evenly distributed.
Petal Round 2 (work each petal separately) :
Starting at anchor, ch2 (does not count as st), (2 dc, 1 tr, 2 dc) all in same anchor, ch1, sl st in top of same anchor to form a full petal. Fasten off and weave tail. Each petal = 1 puff-like fan (16 petals)
Info :
These are the basic petal shapes. For the textured raised look in the photo we create a second textured pass working into the back of petal bases below.
Petal Round 3 (texturing pass) :
Re-join Golden Yellow at base of petal with sl st, ch1, fpdc around the middle tr of the petal (work 5 fpdc across the petal to create a raised ridge), sl st to base to secure. Repeat for each petal (16 petals with 5 fpdc each)
Info :
Front post double crochets push the petal forward and create the sculpted look. Keep posts tight and consistent for a uniform row of petals.
Petal Round 4 (edge finish) :
With Golden Yellow ch1, sc evenly around the outside of each petal working approx 10 sc per petal edge to neaten and slightly flare the tip. Join with sl st and fasten off (approx 160 sc total around all petals fused in rounds)
Info :
Make sure petal edges lie flat and do not fold inward; use slightly larger hook or work more edge sc if petals appear tight.
Petal Round 5 :
Optional: For additional depth, work 1 round of (sc, inc) spaced around the base row where petals meet the center to gently lift petals outward. Work this only if your center is slightly concave (approx adds 16 sts total)
Info :
At the end of petals, weave in all tails and block each sunflower flat to set the petals in position before joining motifs.
β Small Daisy Cluster (Make small cream flowers and tiny green buds) :
Small Cream Flower A - Round 1 :
With Cream yarn and 3.0mm hook, mr, 6 sc in mr (6)
Round 2 :
Inc in each st (12)
Round 3 :
Ch3, skip next st, sl st in next st, *ch3, skip next st, sl st in next st; rep from * around to create 6 loops (6 loop petals)
Round 4 :
Work 5 dc into each loop from Round 3, sl st to base to finish (6 petal clusters). Fasten off leaving tail for sewing (6-petal flower)
Info :
Make many of these small cream flowers to sit around the lace joiner. In the photo clusters of 2-3 small flowers sit between sunflowers.
Small Cream Flower B (tiny ring) - Round 1 :
With Tan and Cream, mr, 8 sc in mr (8). Sl st and fasten off (tiny center for cream flowers). Use these to anchor cream petals if desired (8)
Info :
Make approx 24 small cream flowers total for the runner (estimate 6 between each sunflower motif) and about 12 tiny rings for extra texture.
β Leaf (Make 8 large leaves and 8 small round leaves) :
Large Leaf - Round 1 :
With Olive Green and 3.5mm hook, ch6. Row 1: sc in 2nd ch from hook, hdc in next, dc in next, 3 dc in last ch (turn to work other side of chain), dc in next, hdc in next, sc in last (symmetrical) β finish without turning to form leaf (12 sts including tips)
Large Leaf - Round 2 :
Ch1, sc around entire leaf working 2 sc in each tip stitch (approx 18 sc). Sl st and do not fasten off.
Large Leaf - Round 3 :
Work 3 rounds of (fpdc down center line) to create a raised vein: fold leaf slightly and work fpdc in the center stitch of each row or st to create a ridge (work 6 fpdc centered) then sl st and fasten off. Shape leaf by pulling fabric and blocking (leaf measures approx 7-8 cm)
Info :
Make 8 large leaves for the outer edges of the runner and 8 smaller circular leaves (made with 3.5mm: mr, 8 sc, 1 round sc) to place between small cream flowers.
Small Round Leaf (bud) - Round 1 :
With Olive Green, mr, 8 sc in mr (8). Round 2: 1 sc in each st (8). Fasten off and block to a small dome shape (8)
β Lace Joining Ring (Make 4 rings, one around each sunflower) :
Round 1 :
With Cream and 3.5mm hook, join at any petal base. Ch6, sl st into two petals over, ch6, sl st three petals over, continue working a ring of chain arches around petals by chaining 6 and anchoring to base stitches between petals with sl st until you have 16 arches (this creates a wide lace ring) (16 arches)
Round 2 :
Into each ch6 arch: (sc, ch4, sc) to form looped spokes; join with sl st between arches to the petal bases to secure loops. Fasten off (16 loop spokes).
Info :
The lace ring should sit behind the petals and create the airy circle seen in the photo. Adjust ch lengths (ch5-ch7) to fit your petal size.
Round 3 :
Re-join Cream at any central join point. Work picot clusters: *ch1, sc in loop base, ch3, sl st in 3rd ch (picot), sc; rep around to create decorative picots spaced between loops (approx 16-20 picots around).
Round 4 :
Between every two loop spokes work a small 3dc shell into the sl st join for a fuller lace edge (approx 16 shells). Fasten off and weave ends.
Info :
Make 4 Lace Joining Rings. These rings will be where you anchor the small cream flowers and small green buds to mimic the photo's clustered look.
β Decorative Small Motifs (Connectors, tiny rings and buds) :
Round 1 :
With Cream, ch6, join to make a small ring, into ring work 12 sc and join. Fasten off (small 12-sc ring). Make approx 8 of these per sunflower cluster.
Round 2 :
With Tan, make a tiny sl st circle of 6 sts to seat in the center of the cream rings (6). Sew or sl st into place so flowers have small tan centers as seen in the photo.
Info :
These clusters are purely decorative and help visually break up the lace and petals. Place them between petals and around lace joins as in the photo.
β Runner Assembly & Border :
Info :
Before joining, block all sunflowers, leaves and small flowers flat to shape. Lay out 4 sunflower medallions evenly spaced and pin lightly to a blocking board or flat surface to plan joins.
Assembly Round 1 :
Using Cream yarn and tapestry needle, sew Lace Ring to Lace Ring of adjacent sunflower by matching spoke points - use invisible ladder stitch between outermost spokes to join seams. Make sure spacing between sunflower centers is equal (approx 20-24 cm center-to-center depending on gauge).
Info :
Alternate method: you may join motifs with a slip-stitch join as you crochet the Lace Ring for a crocheted join. The sewn join gives a neater flat seam; choose your preference.
Assembly Round 2 :
Sew small cream flowers and tiny tan centers into the chain spaces between the lace rings, using short yarn tails to anchor snugly. Position 2-3 small cream flowers between sunflowers to replicate photo clusters (use approximately 6 small flowers between each pair).
Assembly Round 3 :
Attach large green leaves at outermost points of the runner (spaced top and bottom of each sunflower). Sew leaves to the lace ring base with whip stitch; reinforce at two points per leaf to keep stable. Attach small round green buds near each small cream flower cluster.
Assembly Round 4 :
Border finish: With Cream and 3.5mm hook, join at any lace outer point and work an edging round of (sc in next 2 sts, picot, sc in next 2 sts, sl st into adjacent loop) continuing around entire runner to give an airy scalloped finish. Fasten off and weave in ends.
Info :
Edge picots and small shells give the delicate look in the photo. If you prefer a sturdier runner, work an extra round of sc to reinforce the edge before picots.
Assembly Round 5 :
Final blocking: Pin runner into shape on a blocking board maintaining a gentle arc for leaves. Lightly steam-block or wet-block and allow to dry completely. This step sets the petals, lace and leaves flat and even.
Info :
Tails: Use a yarn needle to weave in all tails under stitches on the wrong side and trim close. Test joins by lifting and ensuring no stitches pull loose.
β Variation Rounds & Finishing Touches :
Variation 1 :
If you want a longer runner, add additional sunflower medallions by repeating every main motif and adjusting join spacing. Each additional sunflower adds approx 18-22 cm in length depending on gauge.
Variation 2 :
To make a round centerpiece instead of a runner, assemble four sunflowers in a 2x2 square and join using the same Lace Ring joins, adding leaves around the perimeter.
Info :
Care: Hand wash gently and lay flat to dry. Cotton will soften over time but keep good stitch definition if cared for gently.
The Golden Sunflower Olive Table Runner brings a bright, textured focal point to any surface β a perfect mix of rustic charm and delicate lace. Each layered petal, tiny cream blossom and sculpted leaf adds depth and handmade personality. The modular construction makes it fun to create and easy to customize by adding more medallions or changing colors. π§Άπ» Share your finished runner with pride β it's a piece that will brighten many mornings and dinners. Happy crocheting! πΏ