What is the finished size of the table runner?

Using worsted cotton and following recommended stitch counts, the finished runner with six large medallions will be approximately 60-70 inches (150-180 cm) long and 7.5-9 inches (19-23 cm) wide. You can alter length by adding or removing motif repeats.

Can I use a different yarn weight?

Yes. Thicker yarn (bulky) will produce larger motifs; use a larger hook and expect a wider, shorter runner. Finer yarn (DK or sport) will produce smaller, lacy motifs; use a smaller hook and add more repeats for desired length.

Do I have to block the motifs?

Blocking is strongly recommended. Blocking flattens motifs, opens lace, and ensures consistent size and smooth joins. For cotton yarns, wet block or steam block carefully per yarn instructions.

How should I join the motifs?

Use join-as-you-go where possible during the final round for a clean look. For motifs already finished, use a yarn needle and whip stitch or mattress stitch through corresponding rounds. Pin motifs before joining to align shapes.

Will this runner be washable?

If you use machine-washable cotton yarn, wash gently on a delicate cycle or hand-wash and reshape while damp. Re-block if necessary. Avoid harsh agitation which might fray join points.

Can this pattern be shortened or lengthened?

Absolutely. The runner is modular—add more Large Floral Medallions and connectors to lengthen it, or remove repeats to shorten. Recalculate yarn needs accordingly.

How much yarn do I need?

Estimate roughly 800-1000g total worsted-weight cotton: ~350-450g navy, ~300-350g cream, ~150-200g denim. Exact amounts depend on yarn brand and finished length chosen.

How to prevent holes at color changes?

Carry the unused yarn along the wrong side for several stitches and catch it with regular sc or slip stitches to secure. Weave in ends immediately when making short color changes.

Navy And Cream Floral Motif Table Runner Pattern -

Navy And Cream Floral Motif Table Runner Pattern

A long, elegant table runner composed of linked floral-style crochet motifs in deep navy, denim blue and warm cream. This runner features layered circular medallions, small connecting rounds and stylized leaves for a handcrafted botanical look. Perfect for autumn or year-round rustic decor — it lays beautifully down the center of a wooden table and pairs with candles and pumpkins for a cozy display.

Intermediate 10-12 Hours

Materials Needed for Navy And Cream Floral Motif Table Runner Pattern

— Main Fabric

01
Worsted weight cotton or cotton blend yarn (#4), approximately 350-450g in navy (dark blue) for large motif outlines and leaves
02
300-350g in cream (off-white) for flower highlights and inner rounds
03
150-200g in denim/mid blue for secondary rounds and petal details
04
Small amounts (20-40g each) in accent shades if you want subtle variation (light blue or pale grey)

— Tools Required

01
4.0mm (G) crochet hook recommended for worsted weight cotton (or hook specified by your yarn label)
02
3.5mm (E) crochet hook for tighter texture and small motifs (optional)
03
Yarn needle for weaving in ends and sewing motifs
04
Stitch markers (multiple) to mark round starts and key connection points
05
Scissors
06
Blocking pins and blocking mat for flattening motifs
07
Tape measure or ruler to check motif sizes
08
Optional: small safety pins or T-pins for holding joins during assembly
09
Optional: fabric glue for securing particularly loose tails

Progress Tracker

0% Complete

— Notes & Gauge :

Info :

Gauge is flexible for a decorative runner. Each large motif should finish approximately 7.5-9 inches (19-23 cm) across depending on yarn and blocking. Use cotton worsted weight for crisp stitch definition. Work motifs flat in rounds, do not join final rounds into tubes. Block gently to stated diameter for best results.

Info :

Color key used in instructions: A = Navy (dark blue), B = Denim (mid blue), C = Cream (off-white). Change colors where indicated. Carry unused yarn along the wrong side for 4-6 sts or weave tails immediately after finishing each motif.

— Large Floral Medallion (Make 6) :

Round 1 :

With color C, 6 sc in magic ring (6)

Round 2 :

Inc in each st around (12)

Round 3 :

(1 sc, inc) x6 (18)

Round 4 :

(2 sc, inc) x6 (24)

Round 5 :

(3 sc, inc) x6 (30)

Info :

Change to color B for next round to add a subtle ring. Join new color with sl st in first stitch of round to minimize jump.

Round 6 :

With B, 1 sc in each st around (30)

Round 7 :

(4 sc, inc) x6 (36)

Round 8 :

1 sc in each st (36)

Round 9 :

Change to A. (5 sc, inc) x6 (42)

Info :

Begin puff petal placement next rounds. Maintain smooth tension; these textured stitches will create petals that sit above the base rounds.

Round 10 :

With A, *ch2, skip 2, dc3 in next st, ch2, sl st in same st; sk 3; sc in next st* rep around to create small clusters. Work evenly for 42 sts spacing effect (approx 14 cluster points)

Round 11 :

With C, *in the dc3 cluster: (ch1, 3 dc puff, ch1, sl st into cluster center)* across each cluster to form raised petals; join with sl st (42 puff petals formed over clusters)

Round 12 :

1 sc in each st and secure petals by working 2 sc around the base of each petal where necessary (42)

Info :

Stuffing or padding is not needed for these motifs; keep flat. Block motifs after completion for best shape before joining.

Round 13 :

With B, (6 sc, inc) x6 (48)

Round 14 :

1 sc in each st (48)

Round 15 :

Change to C. (7 sc, inc) x6 (54)

Round 16 :

1 sc in each st (54)

Round 17 :

With A: *sk 2, (3 dc, ch1, 3 dc) in same sp (shell), sk 2, sc in next* rep around (creates decorative shell round) (54)

Round 18 :

With C, 1 sc around each shell and sc in every sc (54)

Info :

Measure motif after this round. Aim for 8-9 inches across after blocking. If smaller, add another sc round, if larger, keep current size for consistent runner spacing.

Round 19 :

With B, *ch4, sl st into top of each shell to form open loops between shells; sc in sc spaces* rep around to create airy border (54 loop points)

Round 20 :

With A, 1 sc in each st and across loops (54)

Round 21 :

With C, (8 sc, inc) x6 (60)

Round 22 :

Finish: 1 sc in each st (60). Fasten off and weave in ends. Block flat to final diameter.

Info :

Make six identical Large Floral Medallions. Block each to align center and outer ring before assembly. Keep them in color order: alternating navy-outlined medallions and cream-accented medallions to reproduce photo contrast.

— Medium Concentric Motif (Make 6) :

Round 1 :

With B, 6 sc in magic ring (6)

Round 2 :

Inc in each st (12)

Round 3 :

(1 sc, inc) x6 (18)

Round 4 :

Change to C. (2 sc, inc) x6 (24)

Round 5 :

1 sc in each st (24)

Round 6 :

With A, *ch3, skip 2, dc in next st* around creating spaced arches (24 arches)

Round 7 :

With C, 1 sc in each arch and sc in sc spaces (24)

Info :

Add texture using clusters next round: make slightly raised petals around the center for visual continuity with large medallions.

Round 8 :

With C, *(ch1, 5 dc puff into same sp, sl st to secure)* around arch tops to form small puff clusters (24 clusters)

Round 9 :

With B, 1 sc in each st around clusters to stabilize (24)

Round 10 :

Change to A. (3 sc, inc) x6 (30)

Round 11 :

1 sc in each st (30)

Round 12 :

With C, *ch5, sl st into every 5th st around to create picot-like loops; then 1 sc into each main st between loops* end (30 loop points)

Info :

These medium motifs will sit between the large medallions; use them as alternating connectors. Block and lay out motifs to determine final join layout before attaching.

— Small Round Connector (Make 12) :

Round 1 :

With C, 6 sc in magic ring (6)

Round 2 :

Inc in each st (12)

Round 3 :

With B, (1 sc, inc) x6 (18)

Round 4 :

With A, 1 sc in each st (18). Fasten off. These small rounds act as decorative dots between larger shapes.

Info :

Make twelve small connectors. Vary color placement to echo the runner’s overall color rhythm. Block very lightly to maintain round shape.

— Leaf Motif (Make 12) :

Round 1 :

With A, ch6, sc in 2nd ch from hook, hdc in next, dc in next, tr in next, sl st in last ch to form a tapered point; turn to work along opposite side: tr, dc, hdc, sc, sl st into base. (Make a leaf shape finished)

Round 2 :

Join with C around leaf edge: sc evenly around leaf, placing 2 sc in wider parts to keep shape smooth (approx 18 sc)

Round 3 :

With A, work 3 fpdc along center of leaf on front side to create vein texture; finish with slip stitch and fasten off

Info :

Make 12 leaves. Alternate color dominance: some leaves edged in navy, some edged in cream to create contrast along the runner edges. Block slightly for crisp shape.

— Tiny Petal Motif (Make 18) :

Round 1 :

With B, 6 sc in magic ring (6)

Round 2 :

With C, (ch3, sl st in base) x6 to form tiny loops; finish and fasten off (decorative tiny petals)

Info :

These tiny motifs fill small gaps between larger medallions and leaves. Make at least 18 and vary color placement for balanced visual texture.

— Joining Motifs (Join-as-you-go and Sew) :

Info :

Arrange motifs in layout: large medallion, medium motif, large medallion, medium motif, etc., with leaf and small connectors filling sides to create an elongated runner. Leave alternating orientation for a more organic look as in the image.

Step 1 :

Block each motif first. Lay them on a flat surface and pin in final arrangement. Use pins to adjust spacing and alignment before joining.

Step 2 :

Join large medallion to adjacent medium motif using join-as-you-go at the outer loop points: when working final round of one motif, align and sl st into the corresponding ch-sp of neighbor to form 4-6 join points evenly spaced. Use color A or C according to surrounding motif color to blend joins.

Step 3 :

For joins that are offset or where join-as-you-go is not possible, use yarn needle and whip stitch through matching rounds and the picot loops, making 6-8 small invisible stitches to secure. Backstitch slightly for reinforcement.

Info :

Sew leaves onto outer edge by aligning leaf base to outermost sc round of selected medallion; use ladder stitch to hide joining yarn and maintain flat shape. Space leaves approximately every 10-12 stitches around the medallion edge where pictured.

Step 4 :

Use small round connectors and tiny petals to fill gaps: sew or sl st in place from wrong side so joins are invisible from top. Secure with a couple of stitches and weave tails into nearest stitches.

Info :

Check symmetry and spacing as you join. The runner in the photo alternates heavy and light motifs so maintain alternating color dominance for a balanced look.

— Optional Outer Border (Decorative Edge) :

Round 1 :

Working around entire runner after assembly, join color A with sl st at any seam point. Ch3, *skip 2 sts, 5 dc shell in next st, skip 2, sc in next* rep along full edge to create shells following outer contours. Work shells around outer curves and place 3-dc shell in narrower points to maintain shape.

Round 2 :

With C, sc in each st and in shell centers, placing 1 sc between shells to even edge. Fasten off and weave in ends.

Info :

Only add border if you prefer defined outer edge; leave border off for the delicate, scalloped look as in the picture. If adding border, blocking after border will firm shape.

— Finishing Touches & Blocking :

Info :

Pin the completed runner to the blocking mat in the exact layout. Use steam or wet block according to yarn manufacturer instructions. Stretch gently to align points and shells, ensuring the runner lays flat and even. Allow to dry fully before removing pins.

Info :

Weave in all ends on the wrong side of runner. Trim excess tails close to fabric. If some joins feel loose, add 1-2 reinforcing stitches with yarn needle and same-color yarn for durability.

Info :

Optional: If you want the runner to be more rigid, block and then lightly fuse a thin interfacing to the underside using fabric-safe adhesive; test on a scrap first to avoid discoloration of cotton yarns.

Assembly Instructions

Block and lay out all motifs in final order before joining to ensure spacing and color balance
Join large medallions to medium motifs using join-as-you-go on the final round where loops meet. Secure with slip stitches at 4-6 evenly spaced points per contact
Use whip stitch with yarn needle to sew any motifs that cannot be joined-as-you-go. Match round numbers when seeking the joining point — typically join at Round 19-21 of large motifs to Round 10-12 of mediums
Attach leaf motifs along outer edges by aligning the leaf base to the outermost sc round (Round 20-22 of the large medallion). Space leaves 10-12 stitches apart visually and secure with ladder stitch
Sew small connector rounds and tiny petals into gaps between larger motifs with small invisible stitches; use at least 2-3 stitches per connector for security
If adding outer border, work it after all motifs are joined and the entire runner is blocked once. This ensures consistent tension and even shaping
Reinforce seams by sewing a second pass with matching yarn if the runner will be used heavily or handled frequently
Weave all ends into the underside or inner rounds and trim close. Lightly steam to set joins if yarn allows

Important Notes

💡Use stitch markers to mark the first stitch of each round and key join points; this prevents unintentional drift in circular rounds
💡Block each motif prior to joining so edges sit flat and motifs align cleanly when sewn together
💡Carry color tails along the wrong side for 4-6 stitches to keep joins neat; avoid long floats that could show through thin yarns
💡Match join points by eye or by counting the same round number on adjacent motifs — this ensures tidy seam lines
💡Work join-as-you-go where possible to reduce sewing time, but always pin before finalizing to confirm alignment
💡Use slightly smaller hook for small motifs if you notice holes in openwork; tighter motifs create neater joins
💡When sewing leaves and small motifs, place join stitches through two loops of both motifs to avoid pulling or distortion
💡Test-block a single assembled section to confirm final dimensions before doing the entire runner

Completing this Navy and Cream Floral Motif Table Runner is such a cozy, satisfying journey — each medallion and leaf adds a handcrafted flourish that transforms a simple table into a warm focal point. The modular layout makes it easy to customize length and color to suit your home. Take your time blocking and joining for the best finish, and enjoy the soothing rhythm of repeating motifs coming together. 🧶🍂

Navy And Cream Floral Motif Table Runner Pattern

Intermediate Level

Slow & Steady

Cozy Accent

About This Navy And Cream Floral Motif Table Runner Pattern

Why You'll Love This Navy And Cream Floral Motif Table Runner Pattern

Switch Things Up

Common Mistakes & How to Fix Them

Navy And Cream Floral Motif Table Runner Pattern

Materials Needed for Navy And Cream Floral Motif Table Runner Pattern

— Main Fabric

— Tools Required

Progress Tracker

— Notes & Gauge :

Info :

Info :

— Large Floral Medallion (Make 6) :

Round 1 :

Round 2 :

Round 3 :

Round 4 :

Round 5 :

Info :

Round 6 :

Round 7 :

Round 8 :

Round 9 :

Info :

Round 10 :

Round 11 :

Round 12 :

Info :

Round 13 :

Round 14 :

Round 15 :

Round 16 :

Round 17 :

Round 18 :

Info :

Round 19 :

Round 20 :

Round 21 :

Round 22 :

Info :

— Medium Concentric Motif (Make 6) :

Round 1 :

Round 2 :

Round 3 :

Round 4 :

Round 5 :

Round 6 :

Round 7 :

Info :

Round 8 :

Round 9 :

Round 10 :

Round 11 :

Round 12 :

Info :

— Small Round Connector (Make 12) :

Round 1 :

Round 2 :

Round 3 :

Round 4 :

Info :

— Leaf Motif (Make 12) :

Round 1 :

Round 2 :

Round 3 :

Info :

— Tiny Petal Motif (Make 18) :

Round 1 :

Round 2 :

Info :

— Joining Motifs (Join-as-you-go and Sew) :

Info :

Step 1 :

Step 2 :

Step 3 :

Info :

You ask,

we answer.